DIY TV Stand With Storage Of The Dresser

Author: admin | Categories: tv stands comments
Corner TV Stand

TV Stand With Storage – Voluminous TVs, boxy of yesteryear full of a lot of weight and often took residence in hoarding space or entertainment style amoire stands. The newer, reduced models are easier to accommodate. A low, relatively narrow sideboard, such as with two or three rows of drawers or a row of drawers above the cabinets can become a stand for almost any new television. Approximately 30 inches high, the sideboard is an ideal height to watch television from a bed or sofa. With a few tweaks, the body of the hairdresser becomes useful storage for a receiver, DVD player, video games, movies, remotes and more.

Remove the dresser lid drawer. Unscrewing any side slides, a raised center rail, stops or anything that controls the movement of the drawers inside the chest of drawers. Fill the holes for the screws with wood putty, using a spatula. Sand the patched areas soft when the padding is dry. Sand the dresser all lightly, if you plan to paint. Measure the inside area of a base or platform, if necessary. Cut the custom base of 1/2 inch plywood, using a saw or circular saw. Cut the plywood shelf in half widthwise. Place each half through the drawer openings to put them in place.

Related :  Furniture With Modern Cube Tv Stands

Cut cable holes in the back of the dresser, if you plan to have electronics, such as a satellite receiver and a video player on the platform, using the saw hole. The entire support, inside and out, using semi-gloss paint and a 4-inch roller after applying a coat of primer, if the hairdresser has a shiny stain or finish varnish. Use a 1-inch angular brush to reach the corners and grooves.

Comments are closed.